Dss Led/Button Test; Flash Rates - Vodavi Starplus Triad-S Installation Manual

Keyset Self Test
2. Press the dial pad keys to display an LCD message that indicates which digit was pressed.
Depressing the H-T-P switch from one position to another displays one the following
words: H_POS, T_POS, or P_POS.
3. Test LEDs independently of the Keys by pressing the flex LED button.

DSS LED/Button Test

When the DSS test is selected and a DSS test is invoked, ALL DSS units associated with the
keyset are placed in the test mode.
If no DSS unit is associated with the keyset, the keyset display indicates NO DSS. The DSS LED
test causes all the LEDs to light steady. All LEDs remain lit steady until a DSS flex button is
pressed. Pressing a DSS button turns on the DSS button LED and displays an LCD message on
the associated keyset identifying the DSS button number (01 to 48). This button also turns off
the previously selected flex LED.
Conditions
Test mode interrupts the normal operation of a keyset or DSS.
Table 4-1: Flash Rates
Button IPM
01 On
02 30
03 60
04 60
05 240
06 240
07 480
08 480
09 15
10 120
11 120
12 30
13 480
14 480
P R E S S D S S B U T TO NS
P R E S S D S S B U T TO NS
B TN 0 1
Chapter 4 - Maintenance and Troubleshooting
Type
Steady
Flash
Flash
Double Wink
Flash
Flutter
Flash
Flutter
Flash
Flash
Flutter
Double Flash
Double Wink
Double Flash
< ---- ---- --
< - ---- ---- -
4-5