Texas Instruments TI-89 User Manual page 8

Learning the Basics
Moving the Cursor
TI-89 / TI-92 Plus / Voyage™ 200 PLT Cabri Geometry App
(continued)
On the TI-89, On the TI-92 Plus / Voyage™ 200 PLT
press: press:
ƒ ƒ
„ „
... ...
† †
‡ ‡
2ˆ ˆ
2‰ ‰
2Š Š
To select tools or commands in a menu, press the number that
corresponds to the menu item or use the cursor pad to move up and
down through the menu and press ¸ to select the highlighted
menu item.
For most menu items, once a menu item is selected, it remains in
effect until another menu item is selected. The exceptions default to
the tool; they are the
Pointer
toolbar menu and all File
To move the current active cursor in one of eight directions, press
the cursor pad: up, down, left, right, and the four corresponding
diagonals on the
TI-92 Plus
any two adjacent cursor keys to move diagonally. The cursor moves
one pixel for each keypress. When used in combination with the
j or
TI.89: TI.92 Plus / Voyage 200 PLT:
one pixel for each keypress and five pixels in repeat mode (cursor
pad is held down).
to perform freehand
transformations.
to construct points or linear
objects.
to construct curves and
polygons.
to build Euclidean
constructions and create
macros.
to build transformational
geometry constructions.
to perform measurements and
calculations.
to annotate constructions or
animate objects.
to perform file operations and
edit functions.
tool in the
Define Macro
toolbar menu items.
. On the / Voyage 200 PLT, hold down
TI-89
‚ key, the cursor moves
Construct
4