Texas Instruments TI-89 User Manual page 10

Learning the Basics
Selecting Objects
Hint: Press when
¤
pressing to select
¸
multiple objects.
Note: The Pointer must
begin in an unoccupied
location in the plane.
TI-89 / TI-92 Plus / Voyage™ 200 PLT Cabri Geometry App
(continued)
To select objects, point to the object and press ¸ or draw a
marquee (dotted) rectangle around the objects. To deselect selected
objects, move the cursor to an unoccupied location in the plane and
press ¸.
Selecting one object.
1. Move the cursor using the
tool until the object's name appears
and press ¸.
The selected object appears as a
marquee outline.
Method #1: Selecting multiple objects.
1. Move the cursor using the
tool until the object's name appears,
then hold ¤ and press ¸.
2. Repeat step 1 for other objects that
you want to select (the circle and
triangle in this example).
All selected objects appear as a
marquee outline.
Method #2: Selecting multiple objects.
1. Press and hold
j
TI-89:
› ‚
:
TI-92 Plus / Voyage™ 200 PLT:
and press the cursor pad to draw a
marquee rectangle around the
objects that you want to select.
2. Release
j
TI-89:
TI-92 Plus / Voyage 200 PLT:
(The circle, triangle, and their points
are selected in this example.)
All selected objects appear as a
marquee outline.
Pointer Select an object.
Select the objects.
Pointer
Draw a marquee rectangle
around the objects.
‚
‚
6