Texas Instruments TI-89 User Manual page 62

Controlling How Objects Are Displayed
Tip: Change the thickness
of a point to set it apart from
other points.
Note: This option works as
a toggle. Reselecting the
object changes the outline
back to normal.
Changing the Line
Pattern of Objects
Note: This option works as
a toggle. Reselecting the
object changes the outline
pattern back to normal.
Showing the Entire
Drawing Page
TI-89 / TI-92 Plus / Voyage™ 200 PLT Cabri Geometry App
3. Point to the object to be outlined in
thick outline.
4. Press ¸ to change the outline as
shown then press ¸ again to
change it back to normal.
The tool in the
Dotted Display
pattern of objects between solid and dotted outlines.
1. Press
2‰
TI-89:
TI-92 Plus / Voyage™ 200 PLT:
and select .
9:Dotted
2. Point to a solid outlined object that is
to be displayed in dotted outline.
3. Press ¸ to change the outline as
shown then press ¸ again to
change it back to normal.
The command in the
Show Page
view an entire construction, which can be larger than the drawing
window. It displays the full-page picture of the construction in
miniature.
1. Construct a circle that is larger
than the drawing window.
2. Press
2Š
TI-89:
TI-92 Plus / Voyage 200 PLT:
and select A:Show Page
3. Drag the small window to move
the drawing view to a new
location.
(continued)
Select the object.
toolbar menu changes the outline
‰
Select the object.
toolbar menu allows you to
File
Normal view.
Š
.
58