Texas Instruments TI-89 User Manual page 63

Controlling How Objects Are Displayed
Viewing Data and
Objects at the Same
Time
Note: When you select Data
View, the construction is in
the left screen, and the Data
Matrix Editor is in the right
screen. The Data/Matrix
Editor stores collected data
in the variable sysData. If
you have not collected data,
sysData may be empty and
no data will be displayed.
Clearing Data View
TI-89 / TI-92 Plus / Voyage™ 200 PLT Cabri Geometry App
Press ¸ to accept the
4.
change or N to cancel and
return to the normal drawing
window.
The command in the
Data View
screen for viewing a geometry construction and collected data in the
Data/Matrix Editor at the same time.
1. Construct and measure an object.
2. Press
2ˆ
TI-89:
TI-92 Plus / Voyage™ 200 PLT:
select , and then
7:Collect Data
select .
2:Define Entry
3. Select each data item that you
want to define.
4. Press
2ˆ
TI-89:
TI-92 Plus / Voyage 200 PLT:
select , then select
7:Collect Data
.
1:Store Data
5. Press
2Š
TI-89:
TI-92 Plus / Voyage 200 PLT:
and select
B:Data View
6. Press 2 a (2 function of
the O key) to display the
Data/Matrix Editor and the
stored data and to switch
between the two applications.
The command in the
Clear Data View
back to full-screen mode.
Press
1.
2Š
TI-89:
TI-92 Plus / Voyage 200 PLT:
and select
C:Clear Data View
(continued)
Show Page view.
toolbar menu displays a split
File
Construct and measure.
Define and store the data.
ˆ
ˆ
Display the object and its data.
Š
.
toolbar menu brings you
File
Full-screen mode.
Š
.
59