Individual Directory Setup (Dsc) - Standard Horizon INTREPID GX1260S Owner's Manual

7.4 INDIVIDUAL DIRECTORY SETUP (DSC)

LAMP ADJUST
CONTRAST
>INDIV DIR
KEY BEEP
2. Select INDIVI DIR by using the UP or DOWN key.
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
6. Press the UP or DOWN key to scroll through the alphabet.
N A M E
B – – – – – – –
MIMSID
– – – – – – – –
N A M E
B O – – – – – –
MIMSID
– – – – – – – –
8. After the eleventh letter or space has been entered, press the
CALL/SET key to advance to the MMSID (Maritime Mobile Service
Identity Number) number entry.
9. Press the UP or DOWN key to scroll through the number, 0-9. To
enter the desired number and move one space to the right press the
CALL/SET key. Repeat procedure until all nine space of MMSID
number are entered.
GX1260S
1. Press and hold the CALL/SET key until the
SETUP menu is displayed.
A
3. Press the CALL/SET key to enter the individual
directory.
4. Press the UP or DOWN key to set the desired
address number.
The address number can be set from 01 to 30.
5. Press the CALL/SET key to store the address
number.
7. Press the CALL/SET key to enter the desired
letter and move the cursor one space to the
right. Repeat procedure until the name is
complete. The name can consist of up to eleven
characters, if you do not use all eleven
character press the CALL/SET key to move to
the next space. This method can be used to
enter a blank space in the name.
Owner's Manual page 25