Individual Directory Setup (Dsc) - Standard Horizon INTREPID + GX1270S Owner's Manual

7.5 INDIVIDUAL DIRECTORY SETUP (DSC)

LAMP ADJUST
CONTRAST
CH NAME
>INDIV DIR
N A M E
MMSI
– – – – – – – –
N A M E
MMSI
– – – – – – – –
N A M E
–
MMSI
– – – – – – – –
6. Press the UP or DOWN key scroll through the alphabet and 0 - 9.
N A M E
B
MMSI
– – – – – – – –
N A M E
B O
MMSI
– – – – – – – –
8. After the eleventh letter or space has been entered, press the
CALL/SET key to advance to the MMSI (Maritime Mobile Service
Identity) number entry.
9. Press the UP or DOWN key to scroll through numbers, 0-9. To
enter the desired number and move one space to the right press the
CALL/SET key. Repeat procedure until all nine spaces of MMSI
number are entered.
GX1270S
1. Press and hold the CALL/SET key until the
SETUP menu is displayed.
A
2. Select INDIVI DIR by using the UP or DOWN
key.
3. Press the CALL/SET key to enter the individual
directory.
4. Press the UP or DOWN key to display the next
empty address number.
(Example: The address number 01 - 04 have
been stored in the illustration on the left.)
The address number can be set from 01 to 30.
5. Press the CALL/SET key to select the address
number.
7. Press the CALL/SET key to enter the desired
letter and move the cursor one space to the
right. Repeat procedure until the name is
complete. The name can consist of up to eleven
characters, if you do not use all eleven character
press the CALL/SET key to move to the next
space. This method can also be used to enter a
blank space in the name. To clear the previous
letter, press the H/L key.
Owner's Manual page 36