Standard Horizon INTREPID GX1260S Owner's Manual page 33

A/B Key
This key is unavailable for this radio.
IC Key
Activates the intercom mode between the RAM Mic and the transceiver.
Refer to section 8.3, INTERCOM OPERATION.
WX Key
Immediately recalls a weather channel from any channel location. Recalls
the previous channel when the WX key is pressed again.
Secondary use
When holding down the 16/9 key while pressing the WX key, the mode
toggles between USA, International and Canadian.
SCAN Key
1. Starts and stops scanning of programmed channels.
2. If held while the UP or DOWN key is pressed, the radio will show the
channels in scan memory. This function will not work if the unit is scanning.
Secondary use
Press and hold the SCAN key to add the selected channel into the
transceiver's scan memory for scanning MEM will appear on the LCD to
indicate that the channel has been entered into scan memory. To delete
the channel from scan memory, press and hold the SCAN key until the
MEM disappears from the LCD.
If the transceiver is in the MEM-SCAN mode, then the RAM Mic is in
SC mode. If the transceiver is in PRI-SCAN mode, then the RAM Mic
is in PS mode.
page 30
MIC
16/9 A/B
WX SCAN
LAMP LAMP
IC H/L
CALL CALL
Figure 5. CMP23 RAM Mic
NOTE
Owner's Manual
SQL VOL PWR
GX1260S