Individual Directory Setup (Dsc) - Standard Horizon SPECTRUM GX2350S Owner's Manual

CONTRAST
5
4. Press the CALL/SET key to store the selected level.
The LCD will return to the SETUP menu.

7.4 INDIVIDUAL DIRECTORY SETUP (DSC)

LAMP ADJUST
CONTRAST
>INDIV DIR
POS REPLY
2. Select INDIVI DIR by using the Channel Selector knob.
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
N A M E
– – – – – – – –
MIMSID
– – – – – – – –
6. Turn the Channel Selector knob to scroll through the alphabet and
0 - 9.
N A M E
B – – – – – – –
MIMSID
– – – – – – – –
N A M E
B O – – – – – –
MIMSID
– – – – – – – –
8. After the eleventh letter or space has been entered, press the
CALL/SET key to advance to the MMSID (Maritime Mobile Service
Identity Number) number entry.
GX2350S
3. Turn the Channel Selector knob to select the
desired level. (Example: 5 is selected)
The contrast is stronger as the selected level increases.
A
1. Press and hold the CALL/SET key until the
SETUP menu is displayed.
A
3. Press the CALL/SET key to enter the individual
directory.
4. Turn the Channel Selector knob to display the
next empty address number.
(Example: The address number 01 - 04 have
been stored in the illustration on the left.)
The address number can be set from 01 to 30.
5. Press the CALL/SET key to store the address
number.
7. Press the CALL/SET key to enter the desired
letter and move the cursor one space to the
right. Repeat procedure until the name is
complete. The name can consist of up to eleven
characters, if you do not use all eleven
character press the CALL/SET key to move to
the next space. This method can also be used
to enter a blank space in the name.
Owner's Manual page 32