Dsc Test; Programming Mmsi Into Individual Directory; Dsc Test Call By Using Individual/Position Directory - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.11 DSC TEST

This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
To use this feature, the radio you will be transmitting the test call to
needs to have the DSC Test feature.
To perform the DSC test you will need to enter a MMSI of another vessel into
the individual directory or manually enter in the MMSI using the procedure
below.

8.11.1 Programming MMSI into Individual Directory

Refer to section "8.5.1 Setting up the Individual / Position Call Directory".

8.11.2 DSC Test call by using Individual/Position Directory

1. Press the
appear.
2. Rotate the CH knob to select " DSC TEST ",
then press the
3. Rotate the CH knob to select the ship name
and press the
4. Press the
DSC test call to the other vessel.
5. Press the
operation.
After the radio receives a test call reply from
the vessel that was called, the radio will ring
and show "TEST ACK" display, which confirms
the radio you called received the test call.
Page 80
key. The " DSC Menu " will
CALL
MENU
soft key.
soft key.
soft key to transmit the
soft key to return to radio
NOTE
NOTE
GX2200E