Digital Telephone Answering System - Panasonic Panafax UF-S2 User Manual

Digital Telephone Answering System &
1 ®&
2 The apparatus plays back the OGM.
BASIC FEATU ny
1] Note: /f your apparatus displays "MEMORY FULL 870", you need to erase the incoming messages.
Reset the TAM
The OUT tamp blinks when there is a new message
recorded,
2 &
Your apparatus plays back the new ICM.
The display shows the recorded time for each ICM. G2 SUN 15100 08
Current ICM Total ICM
4G
oar
im to delete ICM. (Note 3)
or
@
8%
%
tis to return to standby.
[1] Note: 1. if you receive an incoming call while you are playing back the messages, the playing of messages will
stop and LCD will display "PICK UP TELEPHONE". Lift up the handset to talk.
2. To cancel ICM playback midway, press ;
3. If you do not do anything for about five seconds after playing back the ICM, the recorded message will not
be erased and will stay in memory. To play back the message again, carry out the operation as described
on page 33.
4. The recording time for the incoming messages can be set. (See page 75, 76)
32