Removing The Cpu - Packard Bell NEC Versa E680 Disassembly Manual

Removing the CPU

To remove the CPU, first remove the battery (see
following steps:
3. Remove the screw retaining the CPU cover as shown in Fig. 10
4. Remove heat sink screws, disconnect fan connector and lift up the heat sink.
Fig. 10 Removing the screws retaining CPU cover
Fig. 11 Removing the screws retaining the heat plate
NEC Versa E680/PB EasyNote E5 Disassembly Manual
Removing the Battery), then perform the
M3.5x2 Black
M10.5x2 Sliver
Page 10