Removing The Optical Disk Drive - Packard Bell EasyNote C3 Disassembly Manual

Removing the Optical Disk Drive

To remove the ODD, first remove the battery (see
keyboard (see Removing the Keyboard) then perform the following steps:
1. Remove the screws retaining the optical disk drive as shown in Fig. 9
2. Flip over the unit, and push the ODD module out from the base unit as shown in
Fig. 10
Fig. 9 Releasing the optical disk drive
Fig. 10 Pushing the optical drive out
Packard Bell EasyNote C3 Disassembly Manual
Removing the Battery) and remove the
M2.5x9 silver
9