Table of Contents
Advertisement
Memory card operations
The unit allows you to use a memory card to perform the following
operations.
SAVE : Save the configuration data of the unit or a remote camera to a
memory card.
LOAD : Load the configuration data saved to a memory card to the unit
or a remote camera.
<Data Target for SAVE and LOAD>
Data
Description of
type
data
Configuration data
SETUP
of unit
*2
Preset data and
MEM
tracing data
*3
Configuration data
CAM
of remote camera
Unit version update
UPGRADE
file
LOG
Unit operation log
*1 : When SAVE is executed on the unit, the file names above are
assigned automatically.
Also, after SAVE is executed on the unit, the file names can be
changed with a personal computer.
· About file names
SETUP: ********.s12
MEM: ********.m12
CAM: ********.c12
Use up to eight single-byte alphanumeric characters for the ********
part above. A file name other than the above may not be displayed
properly on the unit.
*2 : The IP address, subnet mask, and default gateway settings of the
unit are not target for the SAVE and LOAD operations.
*3 : Only the data for the selected remote camera.
The PRESET SPEED value set for each preset is loaded and
saved.
*4 : Only the data for the selected remote camera.
Note
z SAVE and LOAD are not possible with the MEM and CAM items
of a camera connected via a serial connection.
Precautions on handling memory cards
z Never remove a memory card while the memory card access lamp
is lit or blinking.
If you remove a memory card while the memory card access lamp is
lit or blinking, the data saved to the memory card may be lost.
z The data stored in a memory card may be lost due to, for example,
the loss or incorrect operation of the memory card.
We recommend saving any important data to a computer or other
device.
36
SAVE/
File names
*1
LOAD
RP01.s12 to
SAVE and
RP99.s12
LOAD
RP01.m12 to
SAVE and
RP99.m12
LOAD
RP01.c12 to
SAVE and
*4
RP99.c12
LOAD
V*****.s12 to
LOAD only
V*****.s12
RP01.log to
SAVE only
RP99.log
z Memory cards
Memory cards used with the unit should conform to SD or SDHC
standards.
Be sure to use the unit to format memory cards.
Memory cards with the following capacity can be used with the
unit.
SDXC memory cards and MultiMediaCards (MMC) are not
supported.
SD
8 MB to 2 GB
SDHC
4 GB to 32 GB
For the latest information not described in the Operating
Instructions, refer to the following websites.
(Japanese) http://panasonic.biz/sav/
(English) http://pro-av.panasonic.net/
z Observe the following points when using and storing the
memory cards.
• Avoid high temperature and humidity.
• Avoid water droplets.
• Avoid static electricity.
Advertisement
Table of Contents
