Table of Contents
Advertisement
Parts and their functions
$ SDI card
1 EVF I/F connector
The EVF I/F cable 7 from the interface bracket is
connected here.
If the EVF I/F cable is not connected, signals will
not be output from the SDI card.
2 SDI OUT connector
SDI signals are output from here.
E V F I/F
1
S D I O U T
2
$ Interface bracket
3
3 EVF connector
The viewfinder (such as the WV-VF65B or AW-
VF80) is connected here.
4 EVF standby switch
ST.BY. : Places the viewfinder in standby mode.
ON
: Outputs images to the viewfinder.
5 Inter-communications level control
This adjusts the sound level output to the inter-
communications headset.
6 Inter-communications jack,
plug type: 1/8˝ (3.5 mm)
The inter-communications headset is connected
here.
If the plug diameter does not match, use the
adjuster plug supplied with this product.
1/4˝ 5 1/8˝ (6.35 mm 5 3.5 mm)
7 EVF I/F cable
This is connected to the EVF I/F connector 1 on
the SDI card.
4
5
4 6
LEVE L
ST. BY ON
INCO M
7
Advertisement
Table of Contents
