Messages - Panasonic AWRP120GJ Operating Instructions Manual

Messages

When starting up and switching camera groups
Indication
Don't touch
PTZ Lever!
Connecting to
cameras
Operation lock
Indication
LOCKED!
Preset memory
Indication
CAM### PMEM
STORE COMPLETE
CAM### PMEM
DELETE COMPLETE
z A number is displayed instead of "#"
56
Description
Do not operate the PAN/TILT lever
and the ZOOM button because they
are being initialized.
The unit is connecting to the remote
cameras.
Description
Operation is disabled.
(This appears when an operation
is performed while the indicator
of the ENABLE button of the
corresponding area is off.)
Description
Preset memory registration has
completed.
Preset memory deletion has
completed.
Tracing memory
Indication
CAM## TMEM
#m##s Remained.
TM##:
Standby Store.
TM##:
Waiting Opr.
TM##: #m##s
Storing.
TM##: #m##s/#m##s
Standby Recall.
TM##: #m##s/#m##s
Recalling.
TM##: #m##s/#m##s
Standby Restore.
TM##: #m##s/#m##s
Restoring.
Please wait
FLASH Accessing.
CAM GRP can't be
changed in TMEM
z A number is displayed instead of "#"
Description
# minutes ## seconds of recording
is still possible for the tracing
memory of CAM##.
The recording standby state of
tracing memory.
The recording operation wait state of
tracing memory.
Recording tracing memory.
The recall wait state of tracing
memory.
Recalling tracing memory.
The restore standby state of tracing
memory.
Restoring tracing memory.
Writing data to the flash memory in
the unit after recording or restoring
tracing memory.
The camera group cannot be
switched in TMEM mode.