Operating Preset Memory (Pmem) - Panasonic AWRP120GJ Operating Instructions Manual

Operating preset memory (PMEM)

The preset memory of a remote camera can be operated from the unit.
The following settings that you have adjusted in advance can be stored
in preset memory.
z Pan/tilt positions z Lens iris settings (manual iris only)
z Zoom positions z White balance settings
z Focus positions
Notes
z If the MEM ENABLE button indicator is off, preset memory
operation is not possible. Press the button to turn on its indicator
and then perform operation.
z Preset numbers PMEM 1 to 10 are also used as start positions
when recalling tracing memory. Preset data may be overwritten or
deleted by tracing memory operation.
z The number of preset memory and data that can be registered
differ depending on the remote camera.
For details, check the operating instructions for the corresponding
model.
MEM DELETE button
PMEM button
MEM STORE button
PMEM PAGE
indicators
PMEM PAGE
button
Number buttons
[1] to [50]
MEM SETTING button
MEM ENABLE button
z Changing pages
Press one of the number buttons [1] to [50] to directly select any of the
50 preset memory.
Furthermore, pressing the PMEM PAGE button to change pages allows
you to operate up to 100 preset memory for each camera.
Button indicator on
Press the PMEM
PAGE button
Page 1 selected
<Preset numbers and registered pages>
Preset number
PMEM 1 to PMEM 50
PMEM 51 to PMEM 100
Example: When specifying preset number "PMEM 51"
1. Press the PMEM page button to select Page 2.
2. Press number button [1].
z Lighting of number button indicators
The lighting method of the number buttons differs depending on the
remote camera or pan-tilt head that the unit is controlling.
<Lighting method of number button indicators>
Remote cameras and
pan‑tilt heads
AW-HE50, AW-HE60, The indicators of the number buttons with
AW-HE120 preset memory registered turn on.
AW-HE100, AW-PH360, The indicator of the number button that
AW-PH405, AW-PH650, was last pressed turns on.
AW-PH400 However, when preset memory is deleted
in DELETE mode, all of the number
buttons turn off.
Button indicator on
Page 2 selected
Page number Number button
Page 1
[1] to [50]
Page 2
Lighting method of number button
indicators
13