Setting An Nd Filter - Panasonic AWRP120GJ Operating Instructions Manual

Making image adjustments for the selected remote camera

Setting an ND filter

The ND filter setting can be configured when the selected remote
camera uses a lens with an ND filter function.
1 .
Press the MENU button to turn on its indicator .
2 .
Open ND FILTER menu [22] .
1. N D F I L T E R
3 .
Turn the F2 dial to select a setting, and then press the
F2 dial to confirm the selection .
The settings displayed when you turn the F2 dial differ depending on
the model of remote camera connected.
The following shows the menu display on the unit and the setting
values of the remote cameras.
Remote camera setting values
Menu display
on the unit
AW‑HE120
ND1 Through
ND2 1/4
ND3 1/16
ND4 1/64
(*1) "ND2↓", "ND3↓", and "ND4↓" can be displayed by turning the F2
dial but a selection cannot be confirmed by pressing the dial.
Remote camera setting values
Menu display
on the unit
Off
On
N D 1
AW‑HE50
AK‑HC1500 AW‑HE60
AK‑HC1800 AW‑HE100
(*1)
Clear ―
1/4 ―
1/16 ―
1/64 ―
AW‑HE870
AW‑E860
AW‑E750
AW‑E650
AW‑E350
Off
On
(continued)
Selecting an ND filter with the USER buttons (USER 1
to USER 8)
The ND filter settings "ND1" to "ND4" can be assigned to the USER
buttons (USER 1 to USER 8) to enable selection with the buttons.
⇒ "Assigning functions to the USER buttons" (page 30)
1 .
Press one of the USER buttons (USER 1 to USER 8) .
The indicator of the selected button turns on and the corresponding
ND filter is applied.
z When AW-HE870, AW-E860, AW-E750, AW-E650, or AW-E350 is
connected:
The ND filter of the remote camera can be turned Off and On with
the USER button on the unit that has ND1 assigned.
11