Related Manuals for Panasonic AW-PB303
Summary of Contents for Panasonic AW-PB303
- Page 1 High-sensitivity Card AW-PB303 Model No. Before attempting to connect or operate this product, please read these instructions completely and save this manual for future use.
- Page 2 For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference when the equipment is operated in a commercial environ- RISK OF ELECTRIC SHOCK DO NOT OPEN...
-
Page 3: Table Of Contents
CONTENTS WARNING/CAUTION FOR SAFETY ............................4 PREFACE ....................................5 PRECAUTIONS ..................................5 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ....................6 MOUNTING .................................... 7 CONNECTION ..................................9 OPERATING PROCEDURES ..............................11 MENU ITEM SETTING ................................12 APPEARANCE ..................................16 SPECIFICATIONS ................................... 17 STANDARD ACCESSORIES .............................. -
Page 4: Warning/Caution For Safety
WARNING/CAUTION FOR SAFETY WARNING CAUTION • Refer all servicing to qualified personnel • Do not drop the product, do not expose it to strong To reduce the risk of electric shock, don't remove shock, or do not step on it, to prevent a fire and cover or back, unless you are a qualified personnel. -
Page 5: Preface
PREFACE Camera sensitivity can be increased by up to 100 times The card also permits zoom and focus control from a by inserting the high-sensitivity card AW-PB303 into a remote control box, WV-CB550, for example. convertible camera, AW-E300, for example, because its CCD storage (slow shutter) raises camera sensitivity. -
Page 6: Major Operating Controls And Their Functions
ZOOM/FOCUS connector This is a standard lens input terminal with a zoom/focus remote function. If you are using a Panasonic pan/tilt head (AW-PH300), connect the remote cable to the LENS I/F connector on the pan/tilt head, not to the ZOOM/FOCUS connector. -
Page 7: Mounting
MOUNTING (1) Switch the camera off, and disconnect the power CAUTION connector and other cables from the camera. • Be sure to ask your store, where you purchased the product, for mounting. (2) Loosen the four screws on the rear of the camera •... - Page 8 P a n a s o n i c Rear panel Option card slot cover Card setscrews (6 mm) P a n a s o n i c Rear panel setscrews (8 mm) High-sensitivity card...
-
Page 9: Connection
CONNECTION • Before cable connection, switch power off. • Use the AC adaptor AW-PS505 for power supply. • For details on connecting individual devices, refer to the respective operating instructions. Remote Cable (for ZOOM/FOCUS control) When using a pan/tilt head, connect the To ZOOM/FOCUS connector on the card AW-PB303 or remote cable to the pan/tilt head. - Page 10 • In case of using a remote control box WV-CB550 • Connect the remote control box to the camera with three coaxial cables (video signal, G/L signal, control signal) (5C-2V or equivalent, 300 m in maximum extension length). VIDEO IN signal G/L OUT signal OPTION CARD VIDEO OUT...
-
Page 11: Operating Procedures
OPERATING PROCEDURES For details on operation and adjustment, refer to the • Once adjusted, the white balance does not need to operating instructions for the camera. be adjusted again unless the conditions of use are changed. (1) Switch on the individual devices. (6) Adjust the black balance. -
Page 12: Menu Item Setting
MENU ITEM SETTING A convertible camera, for example, AW-E300, can be (6) Return to be ready for shooting. set using the menu as suited to the system and shooting Select [End] with the MENU switch or ITEM switch, conditions. For details, refer to the operation manual for and press the YES switch. - Page 13 Option Card Set Submenu : Storage for 1/8 second. Sensitivity is about twice as high as that when 1/15 second is **Option Card Set** set. Charge Time Auto : Storage for 1/4 second. Sensitivity is about AGC Max. 18dB twice as high as that when 1/8 second is set.
- Page 14 : Storage for 1/4 second. Sensitivity is about Note 2: Electronic shutter operation (For details, twice as high as that when 1/8 second is refer to the operating instructions for the cam- set. era.) : Storage for 1/2 second. Sensitivity is about twice as high as that when 1/4 second is •...
- Page 15 • Neither step nor synchro scan is valid in Auto mode. The ELC (AUTO ND) function only can be turned on or off. When the ELC (AUTO ND) function is turned on, light quantity is automatically adjusted in the order of ELC ALC AGC Storage.
-
Page 16: Appearance
APPEARANCE Unit: mm (inch) 98 (3-7/8) 91.7 (3-5/8) 21.5 (27/32) ZOOM/FOCUS -16-... -
Page 17: Specifications
SPECIFICATIONS Source voltage: 12 V DC (supplied from camera) Power consumption: 3.5 W Operating temperature: 10°C to +45°C (14°F to +113°F) Operating humidity: 30 % to 90 % Dimensions: 21.5 (W) x 70 (H) x 98 (D) mm [27/32” x 2-3/4” x 3-7/8”] 80 g Weight: Weight and dimensions indicated are approximate. - Page 18 Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76 Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024...