3.12 MAINTENANCE MODE (CONT'D)
3.12.5 All Clear Mode
In All Clear settings, you can clear the Counter/EEPROM. Press the
FEED button to proceed.
3.12.6 Counter/EEPROM clear
In this screen you can choose to clear either the Head Counter or
the EEPROM. The default value is COUNTER.
Use the LINE button to select COUNTER or EEPROM as required.
Press the FEED button to confirm the reset and proceed to the next
screen.
3.12.7 Clear Confirmation
In this screen you have to confirm whether to proceed with the
clearing of the counter or EEPROM. The default value is NO.
Use the LINE button to select YES or NO as required.
Press the FEED button to confirm the reset and the last screen
appears to confirm the clearance.
LM Basic 408e/412e Operator's Manual
Section 3: Configuration and Operation
ALL CLEAR MODE
ALL CLEAR
COUNTER EEPROM
COUNTER CLEAR
COUNTER CLEAR
XXXXXXX ALL CLEAR
YES
XXXXXXX ALL CLEAR
COUNTER CLEAR
COMPLETED
ALL
ALL
NO
ALL
Page 3-21