Siemens SCALANCE X-400 Operating Instructions Manual page 2

Classification of Safety-Related Notices
This document contains notices which you should observe to ensure your own per-
sonal safety, as well as to protect the product and connected equipment. These no-
tices are highlighted in the manual by a warning triangle and are marked as follows
according to the level of danger:
! Danger
indicates that death or severe personal injury will result if proper precautions are not
taken.
Warning
!
indicates that death or severe personal injury can result if proper precautions are not
taken.
Caution
!
with warning triangle indicates that minor personal injury can result if proper precau-
tions are not taken.
Caution
without warning triangle indicates that damage to property can result if proper precau-
tions are not taken.
Notice
indicates that an undesirable result or status can occur if the relevant notice is ig-
nored.
Note
highlights important information on the product, using the product, or part of the docu-
mentation that is of particular importance and that will be of benefit to the user.
© Copyright Siemens AG, 1998 to 2005 - All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.
Siemens AG
Automation and Drives
Industrial Communication
Postfach 4848, D-90327 Nürnberg
Siemens Aktiengesellschaft
Disclaimer
We have checked the contents of this manual for agreement with
the hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcome.
C79000-G8976-C186-03
Technical data subject to change.
Printed in the Federal Republic of Germany
2