R3000X Remote Control Installation; Js10 Joystick; S35 Nfu Lever Installation - Simrad AP27 Manual

Simrad AP26 and AP27 Autopilots

3.15 R3000X Remote Control installation

R3000X should be mounted in the supplied bracket that can be
fixed by four mounting screws. The unit is weather proof and
can be mounted outdoor.

3.16 JS10 Joystick

Refer to separate installation procedure for JS10 Joystick.

3.17 S35 NFU Lever installation

The unit is mounted to a bulkhead or panel by two screws from
the front. The cable is connected to the autopilot computer
according to Figure 3-16. Interchange the Port and Stbd wires to
the screw terminals if necessary to make the direction of the
lever movement coincide with the direction of the rudder
movement.
68
R3000X
REMOTE CONTROL
Figure 3-15 R3000X connection
AUTOPILOT COMPUTER
POWER PCB
T B 1 T B 2 TB3 TB4 TB5
TB6
T B 8
TB7
Yel G n R ed Blu
R E M O T E
20221586B