U-Turn - Simrad AP27 Manual

To toggle between LO and HI parameters, press the "AUTO"
button two times quickly.
Notes !
1. If you are in NAV or WIND modes you need not enter AUTO
2. The manually selected setting (HI or LO) will override the

2.11 U-Turn

This feature is very useful in a man overboard situation and
whenever you want to steer back on a reciprocal heading.
U-Turn changes the current set course to be 180 degrees in the
opposite direction. The user must decide whether the U-Turn
should be made to Port or Starboard when bringing the boat on
the new course. U-Turn is activated by a quick press on the
TURN/DODGE/INFO button. The autopilot will continue on
the set course until you press either the PORT or STBD button
to select the direction to make the U-Turn. If you do not press
PORT or STBD within 1 minute, the autopilot will return to the
AUTO mode and stay on course.
TURN/DODGE
/ INFO to enter
20221586B
mode to manually change the parameter set. Just make a
quick double press on the AUTO button.
automatic selection and remain in effect until you re-enter
any automatic mode from STBY.
Press
U-TURN
Quick
double
press
Installation
Boat
Select
makes
STBD
STBD
U-turn
U-turn
25