Toshiba e-STUDIO2500c Operator's Manual page 99

Recalling dimensions registered in the memory
Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall
the dimension data registered previously, and then press the [ENTER] button.
Set other copy modes as required.
Paper size that can be set is as follows:
Length: 100 mm (3.94") to 297 mm (11.69")
Width: 148 mm (5.83") to 432 mm (17.01")
To register the dimension data in the memory, see
dard size in the memory".
5
Press the [START] button on the control panel.
P.98 "Registering non-stan-
Bypass Copying 97