Toshiba e-STUDIO2500c Operator's Manual page 316

8 JOB STATUS
RFC related
Error code
2500
2501
2503
2504
2550
2551
2552
2553
314 Error Code
Problem
Syntax error, com- Check if the Terminal mail address and Destination mail address
mand unrecognized: are correct.
HOST NAME error Check if the mail server is operating properly.
(RFC: 500), Destina- Turn the power OFF and then back ON, and perform the job in
tion mail address error error again.
(RFC: 500), Terminal
mail address error
(RFC: 500)
Syntax error in param- Check if the Terminal mail address and Destination mail address
eters or arguments: are correct.
HOST NAME error Check if the mail server is operating properly.
(RFC: 501), Destina- Turn the power OFF and then back ON, and perform the job in
tion mail address error error again.
(RFC: 501), Terminal
mail address error
(RFC: 501)
Destination mail Check if the mail server is operating properly.
address error Turn the power OFF and then back ON, and perform the job in
(RFC: 503) error again.
If the error still occurs, contact your service representative.
HOST NAME error Check if the mail server is operating properly.
(RFC: 504) Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
Destination mail Check if the Destination mail address is correct. Check the sta-
address error tus of mailbox access restriction, etc. on the mail server.
(RFC: 550)
Destination mail Check the Destination mail address. Check if the mail server is
address error operating properly.
(RFC: 551)
Terminal/Destination File is too large for mailbox. Confirm the mailbox size on the mail
mail address error server. Transmit again in text mode or with a lower resolution. If
(RFC: 552) the error still occurs, divide the document and transmit again.
Terminal/Destination Check if there is an illegal character in the mailbox in the mail
mail address error server.
(RFC: 553)
What to do