1 BEFORE USING EQUIPMENT
Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
Installed inside of the equipment
The Antenna (GN-3010) is necessary.
Antenna (GN-3010)
This is used when the Wireless LAN Module and Bluetooth Module are installed.
When the Wireless LAN module (GN-1041) is installed, it is placed on the back right side of
the equipment.
When the Bluetooth Module (GN-2010) is installed, it is placed on the back left side of the
equipment.
e-BRIDGE ID Gate (KP-2004, KP-2005)
Users can login and use the equipment simply by holding their IC card over the e-BRIDGE ID
Gate.
Installed on the right-hand side of the equipment.
This cannot be installed with the Work Table at the same time.
38
Description of Each Component