Toshiba e-STUDIO2500c Operator's Manual page 335

5
Rotate the green dial down-
ward as indicated by the arrow
to move the paper to the exit
side.
6
Remove any misfed paper
from the receiving tray or the
Bridge Unit (optional).
7
Close the cover of the Bridge
Unit (optional). Skip this step if
the Finisher (optional) is not
installed.
If no misfed paper can be found on the
exit side, perform step 8.
8
Rotate the green dial upward
as indicated by the arrow to
move the paper down.
Jam Symbols 333