Toshiba e-STUDIO2500c Operator's Manual page 96

2 HOW TO MAKE COPIES
5
Press the [MEDIA TYPE] button on the touch panel if the media type
of the paper you have set on the tray is other than plain paper.
6
Press the button of the same media type as the one of the paper
you have set on the tray, and then press the [ENTER] button on the
touch panel.
E.g.: When Thick paper 1 is set
Set other copy modes as required.
If a media type which is not same as the one you have set is selected here, this may
cause a paper jam or significant image trouble.
If the paper size is not specified here, copying may be slowed down.
The paper type which has been set can be confirmed with the touch panel. See the table
in
7
Press the [START] button on the control panel.
When you copy on OHP films, remove the copied OHP films, which have exited on to the
receiving tray one by one. When the films pile up, they may become curled and may not
be projected properly.
94 Bypass Copying
P.90 "Bypass copying on standard size paper" step 5.