Toshiba e-STUDIO2500c Operator's Manual page 58
Basic functions
Hide thumbs
Also See for e-STUDIO2500c:
- Operator's manual (414 pages) ,
- Service manual (402 pages) ,
- Scanning manual (156 pages)
Table of Contents
Advertisement
1 BEFORE USING EQUIPMENT
See the User Functions Guide to change the default settings noted above.
The equipment can also be made to enter the sleep mode manually by means of the following
procedure.
1
Press the [ENERGY SAVER/
SHUTDOWN] button on the
control panel.
2
Press the [SLEEP] button on the touch panel.
The equipment enters into the sleep mode. During this mode, the display on the touch
panel disappears and the [ENERGY SAVER/SHUTDOWN] button lights in green.
To cancel the energy saving mode
Press the [START] button on the control panel. The sleep mode is cleared and the equipment
will be ready for copying.
The sleep mode is also cleared by pressing any button of [ENERGY SAVER / SHUTDOWN],
[COPY], [SCAN], [FAX] and [e-FILING].
56
Preparation 1- Turning Power On/Off
Advertisement
Table of Contents
