76
Lighting
Automatic dipped beam
activation 3
Dipped beam switches on or off
automatically when the engine is running
based on the outside light conditions.
The exterior lights switch off when the
ignition is switched off.
To activate:
1. Switch on the ignition.
2. Turn light switch to 0 and return 7.
3. Repeat stage 2 within approximately 5
seconds.
This action is confirmed with a double
audible warning.
To deactivate:
1. Switch on the ignition.
2. Turn light switch to 0 and return 7.
3. Repeat stage 2 within approximately 5
seconds.
This action is confirmed with a single
audible warning.
For reasons of safety it is advisable to have
the automatic dipped beam function
activated.
Turn signals, hazard warning
flashers
See page 13.
Headlight range adjustment
With dipped beam switched on, adjust
headlight range to suit vehicle load.
Correct adjustment of the headlight range
reduces dazzle for other road users.
z No load
=
z Loaded up to permissible
maximum weight
=
?
0
4