Front turn signal indicator
1. Remove bulb holder from light by
rotating through 90º
2. Renew bulb
3. Install bulb holder in light.
Side repeater light
1. Release light clips from wing using a flat
screwdriver and lift out.
2. Remove bulb holder from light by
rotating through 90º and renew bulb.
3. Install bulb holder in light and install light
assembly into aperture.
Self-help
Rear brake, turn signal and tail
lights
1. Remove 3 screws (using the tool
supplied).
2. Carefully pull light assembly from
retaining pins on the outer side and
remove.
139
6