Main Beam, Headlight Flash; Automatic Dipped Beam Activation; Turn Signal Lights - Vauxhall Antara Owner's Manual

Main beam, headlight flash

To switch from dipped beam to m ain
beam, p ush stalk forwards.
To switch back to dipped bea m, pull stalk
back towards steering wheel.
To activate the headlight flash, pull stalk
towards steering w heel. Main beam is
enga ged for the duration of a ctivation.
The blue control indicator P is illuminated
when m ain bea m or head lig ht flash is on.
Automatic dipped beam
activation 3
Light switch to AUTO ; dipped b eam comes
on a utoma tica lly when the engine is
running, depending on outsid e light
conditions.
For reasons of safety, the light sw itc h
should alway s remain in the AUTO
position.
To ensure automatic dipped b eam
activation functions properly , do not cover
the light sensor on top of the instrument
panel.
Lightin g
Turn sign al lights
To activa te, press stalk up or down lightly .
S ta lk up = Right turn
S ta lk down = Left turn
When the steering wheel is turned back, the
stalk automatically returns to its rest
position. This will not happen when making
a minor steering manoeuv re such as lane
changing.
Tap signal: briefly move stalk to resistance
point. The turn signal then flashes three
times when changing lanes or the like.
Hold the sta lk if you want the turn signals
to flash for longer. When released, the stalk
will spring back to rest position.
The volum e of the turn signal lights'
audible wa rning is dependent upon vehicle
speed.
91