Vauxhall VIVARO Owner's Manual page 132

128 Self-help
Remove cover plate to access battery. Connect the leads in the order shown in the
picture:
1. Connect one end of the first jump lead to
the positive terminal 1 of the discharged
battery (identified by "+" sign on battery
case or terminal).
2. Connect the other end of this lead to the
positive terminal 2 of the battery
providing the jump start ("+" sign).
3. Connect the first end of the second jump
lead to the negative terminal 3 of the
discharged battery ("-" sign).
4. Connect the other end of this jump lead
4 to ground on the vehicle providing the
jump start, e.g. engine block or screw
connection in engine suspension.
9
Warning
Care must be taken to ensure that the
leads do not inadvertently contact metal
surfaces within the compartment area.
z Do not connect the lead to the negative
terminal of the battery on the vehicle
providing the jump start! The connection
point should be as far away from the
battery as possible.
z Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
z Reverse above sequence exactly when
removing leads.