Vauxhall VIVARO Owner's Manual page 53

Rear seat access 3
To facilitate access to the rear seats, fold
the seat backrest forwards. If necessary
release the two-latch seat belt from its
buckles.
9
Warning
Ensure that the backrest returns to its
correct position and the seat belt buckles
engage securely - see page 58.
Folding seats 3
On some variants, the cargo area can be
increased by folding up the rear seats.
Remove the head restraints. Pull the side
handle to release the backrest and fold
forward onto the seatbase, if necessary
releasing the two-latch seat belts from their
buckles.
Release both locking bars at the rear base
of the seat by pulling rearwards.
Lift and fold the seat assembly, until the
seat frame rests in place.
9
Warning
When folding the seat use caution -
beware of moving parts. Ensure the seat
is secure when completely folded.
Seats, interior
To return the folding seat to the upright
position, support the seat assembly and
release the bar by pulling the bar directly
towards you. Gradually lower the seat
assembly, allowing the rear support legs to
fold down. Lower the seat completely,
ensuring the rear support legs are located,
and latched. Raise the backrest, reinstall
head restraints and connect the seat belts.
9
Warning
When installing the seat, ensure that the
seat is properly located on the anchor
points and that the locking catches are
fully engaged, the backrest is returned to
the correct position and the seat belts are
engaged securely.
49