Brake Fluid - Vauxhall VIVARO Owner's Manual

9
Warning
Allow engine to cool down before
removing coolant filler cap. Remove filler
cap carefully so that pressure can escape
slowly, otherwise there is a risk of
scalding.
Top up anti-freeze. If no anti-freeze is
available, top up with clean tap water.
If tap water is unavailable, distilled water
can be used.
After topping up with tap or distilled water,
have the anti-freeze concentration
checked, and anti-freeze added if
necessary. Have the cause of the coolant
loss remedied. We recommend that you
consult your Vauxhall Authorised Repairer.
When closing, tighten coolant filler cap as
far as it will go.
Coolant temperature
For physical reasons, the engine
temperature gauge shows the coolant
temperature only if the coolant level is
adequate.
During operation the system is pressurized.
The temperature may therefore rise to over
100 °C.
If the temperature gauge enters the
uppermost zone, check the coolant level
immediately.
z Coolant level too low:
Top up coolant. Pay strict attention to
the instructions given under "Anti-freeze
and corrosion protection" and "Coolant
level". Have the cause of coolant loss
remedied. We recommend that you
consult your Vauxhall Authorised
Repairer.
z Coolant level OK:
Have the cause of increased coolant
temperature remedied. Contact a
workshop. We recommend that you
consult your Vauxhall Authorised
Repairer.
Service plan, maintenance

Brake fluid

Brake fluid level
9
Warning
Caution - brake fluid is poisonous and
corrosive. Do not allow it to contact eyes,
skin, fabrics or painted surfaces. Direct
contact may cause injuries and damage.
151