Handling Incoming Calls - Brother MFC-J220 User Manual

Sending Faxes
Difficulty
Cannot send a fax.
Transmission Verification Report
says "RESULT:ERROR".
Poor fax send quality.
Vertical black lines when sending.
(MFC-J410 and MFC-J415W only)

Handling Incoming Calls

Difficulty
The machine "Hears" a voice as a
CNG Tone.
Sending a fax call to the machine.
Custom features on a single line.
74
Suggestions
Check all line cord connections.
Make sure that the FAX
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports in
chapter 6 in the Advanced User's Guide.)
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get "RESULT:ERROR" on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the menu setting of Compatibility to Basic(for VoIP).
(See Telephone line interference / VoIP on page 78.)
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner glass on page 58.)
Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 58.)
Suggestions
If Fax Detect is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Fax Detect to Off.
(See Fax Detect on page 28.)
If you answered on an extension telephone, press your Remote Activation Code
(the factory setting is l 5 1 (l 9 1 for New Zealand)). If you answered on an
external telephone, press Start to receive the fax. When your machine answers,
hang up.
If you have Call Waiting, Call Waiting/Caller ID, an alarm system or other custom
feature on a single telephone line with your machine, it may create a problem
sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error
Correction Mode) feature should help overcome this problem. This condition is
related to the telephone system industry and is common to all devices that send
and receive information on a single, shared line with custom features. If avoiding
a slight interruption is crucial to your business, a separate telephone line with no
custom features is recommended.
key is illuminated.