Printing Photos; Print All Photos - Brother MFC-J220 User Manual

Chapter 8

Printing Photos

Before you can print an individual image, you
have to know the image number.
a
Make sure you have put the memory
card in the correct slot.
Press (PHOTO CAPTURE).
b
Print the Index. (See Print Index
(Thumbnails) on page 25.)
c
Press a or b to choose Print Photos.
Press OK.
d
Enter the image number that you want to
print, from the thumbnails printed on the
Index page.
Press OK.
e
Repeat step d until you have entered
the image numbers that you want to
print.
Note
• You can enter the numbers at one time by
using the l key for a comma or the # key
for a hyphen. For example, Enter 1, l, 3,
l, 6 to print images No.1, No.3 and No.6.
Enter 1, #, 5 to print images No.1 to No.5.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
After you have chosen the image
numbers, press OK again.
g
Enter the number of copies you want
using the dial pad.
h
Do one of the following:
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 27.)
 If you do not want to change any
settings, press Colour Start to print.
26

Print All Photos

8
You can print all the photos on your memory
card.
a
Make sure you have put the memory
card in the correct slot.
Press
b
Press a or b to choose
Print All Photos.
Press OK.
c
Enter the number of copies you want
using the dial pad.
d
Do one of the following:
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 27.)
 If you do not want to change any
settings, press Colour Start to print.
(PHOTO CAPTURE).
8