Blueant Q1 User Manual page 39

Function Button
Reject a Call
"Vol +"
Redial Last
Number
Use Phone Voice
Dialing
Switch Voice
Isolation
between
Standard and
Max
"Vol +"
Mute
and "Vol -"
How Long When
Double Ringing
Click
Hold for 1 Standby,
second Active Call
Click Standby
(Voice
Control
Off)
Double Active Call,
Click 3 Way Call
Hold Active Call,
together 3 Way Call
for 1
second
(until you
hear a
beep)
Notes
You can also answer or reject a call using
the voice commands.
This command tells the connected phone
to redial its last outgoing call (it doesn't
matter whether the phone was connected
to the Q1 at the time that call was made).
If you use this button function while you
are on an active call, the current call will
be put on hold while the Q1 dials the call.
This function is only available through
this button press if you have turned off
voice control (either through the "Settings
Menu" or by using the button combination
described below).
If voice control is turned on, then you can
access your phone's voice dialing feature
by using the voice command "Phone
Commands" instead.
You will hear an audio confirmation of the
current voice isolation setting when you
switch between them.
Please note that this button press changed
in firmware version 8.19. If you have an
older firmware release on your Q1, then
you switch modes by single clicking the
BlueAnt button.
This function mutes the audio on the
current call. You will hear a beep every 20
seconds to remind you that the audio is
muted.
Repeat the button combination to undo the
mute.
39