Q1 Overview: Buttons And Microphones; Wearing The Q1 - Blueant Q1 User Manual

Q1 Overview: Buttons and Microphones

In addition to the volume up and down buttons, the Q1 has a multi-function button called the BlueAnt
button. You use this to turn the Q1 on and off and to activate the voice recognition. You can also
access some advanced functions by pressing different combinations of the three buttons. For a full
description of all the button functions, see "Button Functions" (page 37).
The Q1 has two microphones: one is located on the front of the device, next to the BlueAnt button, and
the other is located on the tip of the device, on the side closest to your face.
For best results when wearing the Q1, you should take care to ensure that the Q1 does not rest
against your face, as this may muffle the second microphone and make it harder for the Q1 to
recognise your voice commands.

Wearing the Q1

Before you can wear the Q1, locate the ear hook that came in the box with your Q1, and attach it by
pushing the smaller end of the hook through the hole on the back of the Q1. You can then adjust the
length so that the hook will fit comfortably on your ear.
Wearing the Q1 in your Right Ear
The following diagram shows how you should attach the ear hook if you want to wear the Q1 in your
right ear. For the best fit, you should rotate the ear gel so that it sits on the Q1 at the angle shown in
the diagram.
11