USER MANUAL Bluetooth Headset with LCD For Bluetooth Mobile Phones www.blueantwireless.com Nth America support@myblueant.com 1 866 891-3032 New Zealand support@blueant.com.au 0800 443 122 (NZ) Australia support@blueant.com.au 1300 669 049 (AUS)
Speaker (Audio On) Volume Level Indicator Bluetooth Connection Status (Bluetooth Active) When the MFB(3) is pressed, the V12 will cycle through the available functions. Release the button when the desired operation is displayed. 4 LCD (Liquid Crystal Display) 5 Ear Piece...
Page 3
LCD screen. Place the Lanyard around your neck and plug the micro-usb adapter end into the Charge port of the V12. Though you will not hear a ring tone from the V12 at that distance from your ear, you will feel the Vibrating Alert and hear your phone ring…...
You must pair the V12 headset to your Bluetooth mobile phone to create the link or audio connection between the headset and your phone. When you fi rst turn the V12 on, it will automatically go straight into Pairing mode ready to be found in Bluetooth searches from your phone.
(See Pairing to your Bluetooth mobile phone page 3). Make a Call (Normal Dial): Dial a contact and press send on your phone. Audio will automatically be on the V12. Note: With some phones like Siemens S55 and Panasonic X70, audio will at fi rst be on the phone during an outgoing call.
Placing a call from numbers stored in call History (For Handsfree Profi le Phones only): The V12 automatically stores the 10 last received numbers in the call History. 1. From standby, access the call History by pressing simultaneously the Volume Up(6) and Volume Down(7) buttons for 3 seconds.
Page 7
Multi-Pairing / Switching Connections Between Phones: The V12 can be paired to 5 different Bluetooth phones. Once 5 phones have been paired an additional pairing will automatically delete the phone that has not been used for the longest time. Thus, the V12 always maintains 5 phones in its memory.
Page 8
Specifi cations: Bluetooth compliance ________ Bluetooth version 1.2 specifi cations Supported Bluetooth profi les ___ Bluetooth headset and handsfree profi les with Operating Range ____________ Up to 10 meters Frequency _________________ 2.4GHz Talk Time __________________ Up to 12 hours Standby Time _______________ Up to 300 hours...
11. Why can’t I hear the dial tone from headset when I dial? 12. Voice dialing is not successful every time what can I do? 13. I have read all the solutions in this document but I still cannot get my V12 to work properly, what can I do...
Page 10
For outgoing calls fi rmly press the MFB(3) button once to activate voice dialing or dial as per normal from your phone and the call will transfer to the V12. For redialing the last number called, press the MFB(3) for 3 seconds, redial will be displayed on screen and a second beep is heard.
Page 11
11. Can I use the V12 to listen to music from my mobile? Some phones can send music to the V12 using the Handsfree Profi le but it will be a mono signal and sound a bit like an AM radio. Good applications for this are audio books.
Page 12
Bluetooth device is used in close proximity with a microwave. Check if there are any such devices in the surroundings, and if so keep the distance between the V12 and such devices to at least 5 - 10m. Usually any interference will only cause a slight crackling sound.
Page 13
Follow through the instructions in the V12 Manual. To enter pairing mode Press and hold the MFB till ‘pairing’ is displayed on screen. If you have already paired 3 different phones to the V12 you will need to reset it to pair a new device.
Please refer to the user guide of your phone. Noisy environments can affect voice recognition. Record your voice commands in a quiet place. 13. I have read all the solutions in this document but I still cannot get my V12 to work properly, what can I do?
2. Check our website for more information, updated manuals and troubleshooting. www.blueantwireless.com 3. Call us and speak to one of the BlueAnt Wireless Customer Service Team We will clarify whether you have a hardware or connection issue. 4. Return the unit directly to BlueAnt for testing and replacement of faulty items –...
Page 16
Contact Us For Connection Assistance or if you are having diffi culties using your V12, please make an enquiry on our website www.blueantwireless.com OR CALL Nth America support@myblueant.com 1 866 891-3032 New Zealand support@blueant.com.au 0800 443 122 (NZ) Australia support@blueant.com.au 1300 669 049 (AUS) www.blueantwireless.com...