Skype - Blueant Q1 User Manual

Skype

Once you have paired the Q1 with your PC, you can use it with a Voice over IP application such as
Skype.
In order to use the Q1 with Skype, you may need to change the Audio Settings in the Skype Options
Menu: configure the microphone and speaker to use Bluetooth Wave (or a similar option) for the
audio, rather than your sound card or the Windows Default Device.
To test that the Q1 is working properly with Skype on your system, you can use Skype's automated
test service: you can either access this from the Audio Settings in the Skype Options Menu (click on
the option to Make A Free Test Call) or you can add the Skype user echo123 to your contacts list and
make a call to that user.
If the audio is working properly, you will hear a recorded message explaining how the test service
works. You can then record a few seconds of audio and hear it played back to you.
If you have paired and connected the Q1 to your PC, but still cannot hear any audio,
then check your PC's audio settings: it may be that your audio is muted.
30