20.41-27
.22 kg
47.1 60 lb
8-
Warnings and cautions
WARNING:
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module-level repair. Because of the c
subassemblies, no one should attempt to make repairs at the co
modifications to any printed wiring board. Improper repairs can create a safety hazard.
WARNING:
•
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
•
The stabilizing feet are attached
•
The racks are coupled together in multi
•
Only one component is extended at a t
•
component is extended for any reason.
WARNING:
•
Do not disable the power cord grounding plug
feature.
Plug the power cord into a grounded (earthed) electrica
•
times.
Unplug the power cord from the power su
•
•
Do not route the power cord where it ca
it. Pay particular attention to the
extends from the server.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipme
do
not plug telephone
or telecommunications connectors into this receptacle.
T i
h s symbol i
ndicates the presence of a hot surface or hot component. If this surface is
co
ntac
ted, the potential for injury exists.
WARNING:
To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of persona
observe local occupational health and safety requirements and guidelines for manual
material handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multip
le sources of power.
WARNIN
G:
To reduce the risk of injury from electric shock, remove all power cords
to completely disconnect power from the system.
Only authorized technicians trained by HP should attempt to repair this
To reduce the risk of personal injury or damage to the equipment, be sure that:
To reduce the risk of electric shock or damage to the equipment:
l injury or damage to the equipment,
omplexity of the individual boards and
to the rack if it is a single-rack installation.
ple-rack installations.
ime. A rack may become unstable if more than one
. The grounding plug is an important safety
l outlet that is easily accessible at all
pply to disconnect power to the equipment.
n be walked on or pinched by items placed against
plug, electrical outlet, and the point where the cord
mponent level or to make
Troubleshooting 41
nt,