Remote Control Menu - Barco PresentationPRO-II User Manual

4. Menu Orientation
oÉãçíÉ=`çåíêçä=jÉåì
The figure below illustrates a sample Remote Control Menu :
H
O
M
E
Figure 4-50. Remote Control Menu (sample)
The Remote Control Menu serves two purposes:
•
•
To access the menu:
•
The following functions are provided:
•
PresentationPRO-II • User's Guide
REMOTE CONTROL
Unit ID
Remote Control
Unit IP: 192.168.0.10
- - - - - STATUS - - - - -
No Connection
Ctrlr IP:
Destination
Router
SAVE
When using PresentationPRO-II on a standalone basis, the Remote Control
Menu is used to set communications parameters for downloading software
updates via Ethernet.
When PresentationPRO-II is controlled from an external controller, the Remote
Control Menu is used to set the unit ID and enable/disable remote control itself.
Press { REMOTE CONTROL } on the Home Menu .
Unit ID — When PresentationPRO-II is controlled from an external controller, this
function sets the ID of the PresentationPRO-II chassis. The ID range is 1 to 32 .
Important Some external controllers will detect multiple IDs and prompt
the user to correct the problem. Only the first device will
connect to the console. Other devices with conflicting IDs will
be refused a connection.

Remote Control Menu

[ 1 ]
N
A
[ Off ] V
[ N/A ]
[ Undefined ]
A
[ Internal ]
D
J
83