Monitor Layout; Touch Screen Calibration; A Word About Los - Barco PresentationPRO-II User Manual

6. Operations
léÉê~íáçå~ä=`çåÑáÖìê~íáçå
The following topics are discussed in this section:
•
•
•
jçåáíçê=i~óçìí
Use the following diagram as a recommended layout for your monitor.
Figure 6-1. Application Layout
For optimum viewing and utility, place your Program monitor in close proximity to the
chassis, either above or immediately to the right.
qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå
As an excellent prerequisite to all operating procedures, it is recommended that you
calibrate the Touch Screen.
Use the following steps to calibrate your Touch Screen display:
1.
2.
3.
4.
^=tçêÇ=^Äçìí=ilp
On rare occasion, you can experience LOS (loss of signal) — typically due to a poor video
or computer connection. In these cases, PresentationPRO-II obeys a precise set of rules:
•
•
•
In each case, when the video signal recovers, the system re-enables it as before.
PresentationPRO-II • User's Guide

Monitor Layout

Touch Screen Calibration

A Word About LOS

Program
If required, press { HOME } to display the Home Menu .
Press { DISPLAY } to show the Display Settings Menu .
Press { LCD CAL } to display the first Touch Screen Calibration Menu .
Follow directions on screen to complete the calibration procedure.
Scaler LOS — If there is a LOS for a video signal inside a scaler (PIP or KEY),
the video switches to black, but the scaler remains in its current size and position.
Background LOS — If there is a LOS for the background DVI input, the video
switches to the background's selected matte color.
DSK LOS — If there is a LOS for the DSK, the system switches the DSK Off
(specifically, selecting " none " as the type).
Operational Configuration
101