Table of Contents
Advertisement
`K==réÖê~ÇáåÖ=pçÑíï~êÉ
Ethernet Upgrade Method
7.
8.
146
In the DOS command window, type:
ping 192.168.0.10
... and press Enter .
Note
Use the unit's actual IP address, as determined in step 4
above.
~
If the computer is able to successfully communicate with the
PresentationPRO-II, you will see a series of " replies " from the target IP
address.
~
If you see a " Request timed out " message, the PC is unable to locate
and communicate with the PresentationPRO-II. If this is the case:
•
Check your network connections and settings as described
above, or ...
•
Contact your network administrator.
With communications established, to find the current software revision:
a.
Open the terminal program and create a serial communication link to the
PresentationPRO-II unit.
b.
At the PresentationPRO-II command prompt, type:
rev
... and press Enter .
PresentationPRO-II • User's Guide
Advertisement
Table of Contents
