Barco PresentationPRO-II User Manual page 45

4. Menu Orientation
fåéìí=^Åèìáëáíáçå=jÉåì
The figure below illustrates a "pre" menu — the Input Acquisition Menu .
H
O
M
E
S
A
V
E
Figure 4-4. Input Acquisition Menu: No File Saved (sample)
There are two situations in which the Input Acquisition Menu can appear:
1.
2.
Once the source has been saved, the Input Acquisition Menu will not be shown again,
unless the system discovers that video is not present.
If you select a source and there is a video mismatch, if video is not present or if the
acquisition fails, one of the following messages will appear:
File mismatch or no video
detected.
Check cable connections
for input _______ .
Ensure video source is present.
Select FORCE ACQUIRE once video
is reconnected.
Figure 4-5. Input Acquisition Menu: Mismatch or No Video (sample)
PresentationPRO-II • User's Guide
INPUT ACQUISITION
Source acquired.
Select INPUT to adjust source
or SAVE to save configuration.
INPUT
After a factory reset has been performed, the Input Acquisition Menu
automatically appears when you first select a source — but prior to pressing
TRANS for the first time. As each source button is pressed, the system acquires
the video and displays the menu. The following options are available:
~
Press { SAVE } to save the source and display the Input Menu , or ...
~
Press { INPUT } to display the Input Menu without saving the source.
In this way, you can quickly acquire and save all nine inputs.
After TRANS has been pressed for the first time, the Input Acquisition Menu will
appear when you (a) select a source that has not been previously saved, and (b)
press TRANS to transition that source to Program. Here also, the menu is
displayed and you can save the source.
SRC_3
Source acquisition failed.
Check cable connections
for input _______ .
Ensure video source is present.
Select FORCE ACQUIRE once video
is reconnected.
Input Menu
33