Energy Saving Settings; Energy Saver Mode - Xerox Phaser 7800 System Administrator Manual

Energy Saving Settings

Energy Saver Mode

You can set the time the printer spends idle in ready mode before the printer automatically transitions to
a lower power level. You can also turn off the automatic transition.
1. At the control panel, touch Printer.
2. Touch the Tools tab, then touch Setup.
3. Touch Energy Saver.
4. Enable the automatic transition:
a. Select the Enable Energy Saver check box.
b. Touch Edit for the option you want to change:

Ready Mode to Low Power

Low Power to Sleep
c. Use the keypad to enter the minutes, 1–120. The Low Power default setting is 15. The Sleep
default setting is 45.
To confirm the change, touch OK, or X to cancel it.
d.
5. Touch OK to return to the Setup screen.
Notes:

To turn off the automatic transition, clear the Enable Energy Saver check box.

The printer exits Energy Saver mode when it receives a print job, or when you press the Power
Saver button.
Administrator Tools
Phaser 7800 Color Printer
System Administrator Guide
75