Horizon Fitness HORIZON T83 User Manual page 7

AS SE MB LY ST EP 
HARDWARE BAG  CONTENTS :
BOLT (L)
ARC WASHER (J)
CONSOLE MAST
HANDLEBARS
A Open HARDWARE BAG .
B Attach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (L) and 2 ARC WASHERS (J).
NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
C Repeat on other side.
12
T83_Treadmill_Rev.1.8.indd 12-13
BOLT (L) ARC WASHER (J)
120 mm 17 mm
Qty: 4 Qty: 4
ASSEMBLY STEP 
HARDWARE BAG  CONTENTS :
SCREW (M)
10 mm
Qty: 10
SCREW (M)
CONSOLE MAST COVER
CONSOLE MAST
A Open HARDWARE BAG .
B Attach LEFT CONSOLE MAST COVER to CONSOLE MAST using 5 SCREWS (M).
C Repeat on other side.
POWER SWITCH CIRCUIT BREAKER
YOU'RE FINISHED!
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will light up.
13
7/9/07 9:56:16 AM