Quick Guide To System Functions - Honeywell ADEMCO VISTA-40 User Manual

Quick Guide To System Functions

FUNCTION PROCEDURE
Check Zones Press [✱].
Display All Press and hold [✱] for 5 seconds.
Descriptors
Arm System Enter code.
Press arming key desired (AWAY,
STAY, INSTANT, MAXIMUM).
Disarm System Enter code. Press OFF [1].
Bypass Zones Enter code. Press BYPASS [6].
Enter 2-digit zone number(s).
Chime Mode Enter code. Press CHIME [9].
Test Mode Enter code. Press TEST [5]
View Messages Press and hold [0] for 5 seconds
View User Enter user's code. Press [✱] + [✱].
Capabilities
GOTO Partition Enter security code. Press [✱].
Enter partition number (1-2).
Self-Help Press and hold any function key for
at least 5 seconds.
Add a User Enter master/manager code.
Press CODE [8].
Enter new user's user number.
Enter code for that user.
Enter authority for that user in this
partition (1-5).
Follow prompts, 1=Yes, 0=No.
Change a Enter master/manager code.
User's Code Press CODE [8].
Enter user's 2-digit number.
Enter new code for that user.
Press 0 (No) at prompt.
Delete a User Enter master/manager code.
Press CODE [8].
Enter user no. to be deleted.
Enter master/manager code.
Press 1 (Yes) at prompt.
Access Control Enter security code. Enter 0.
Control Output Enter security code. Press [#]
Device Enter 71 or 72.
Enter security code. Press [#]
Enter 70.
– 48 –
COMMENTS
To view faulted zones when is system not ready
Displays all alpha descriptors programmed by
installer.
Arms system in mode selected.
Disarms system and silences alarms.
Bypassed zones are unprotected and will not
cause an alarm if violated.
Keypad will sound if doors or windows are
violated while system disarmed.
Activates alarm sounder and allows sensors to be
tested.
Message from central station will appear.
Displays partitions & authority levels assigned to
the user.
Allows a user at one keypad to perform functions
in another partition, (user must be authorized).
Will display abbreviated instructions for the key
pressed.
Master & Manager level users can add users to
the system, each with its own code and
authority level.
Master & Manager level users can change their
own or other users' codes.
Master & Manager level users can delete users.
A user can only be deleted by a user with higher
authority level.
Activate access relay for current partition.
Activate output device as programmed.
Activate output device manually