Chime Mode; Using The 9 Key - Honeywell ADEMCO VISTA-40 User Manual

Chime Mode

Using the 9 Key

Your system can be set to alert you to the opening of a door or window while
it is disarmed by using CHIME mode. When activated, three tones will sound
at the Keypad whenever a protected perimeter door or window is opened, and
the Not Ready message will be displayed. Pressing the READY key will
display the open protection points.
Note that Chime mode can be activated only when the system is disarmed.
1. To turn Chime Mode on, enter the security code and press 9 .
2. To turn Chime Mode off, enter the security code and press 9 again.
– 32 –
CHIME MODE ON
CHIME MODE OFF
The CHIME MODE ON message will appear
for about two seconds then disappear. To
display this message again (to determine
whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.
The CHIME MODE OFF message will appear
for about two seconds then disappear. To
display this message again (to determine
whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.